Drywall roll Forming Machine is a vertical member
in the light frame construction techniques called balloon framing and
platform framing of a building's wall. Drywall stud roll forming machine is the essential for its production.
Entry gate will be provided for movement of sheet to roll former.
Main Base
The main base is MS fabricated structure and adequately ribbed to minimize the distortion. It is accurately machined on top and bottom surfaces the threaded holes are made on the bed for positioning the stands.
Mill stands (Station)
The stands are mounted on the bed of the machine the line alignment can be easily done due to guide ways arranged on the bed of the machine. Each forming head consists of a fixed housing and sliding type out board housing. The mill stands will be arranged to locate shafts mounted on taper bearings. For the top shafts the bearings are housed in the cartridge type bearing blocks. The bottom shaft bearings are located in the bored machined in the housings. The bottom arbors are fixed in position whereas the top arbors along with cartridge blocks could be raised or lowered in vertical guides machined in housings.
- De coiler 2 ton cap.
- Entry Gate with
- Roll Forming with 9 station , 1 Gear Boxes & 5 H.P. electrical.
- Control Panel semi auto
- Cutting Unit
- Maximum sheet width that can be formed : 600 mm
- Maximum sheet thickness in G I Strips that can be formed : 1 mm
- Vertical distance between shafts : 100 mm
- Horizontal distance between shafts : 190 mm
- Number of forming stations : 9 nos.
- Vertical station : 7 nos.
- Total HP for Line : 5 (ABB)
- Speed of the machine : 4mt/minute
- Size of machine : 1600 x 800 x 1100 mm
- Coil weight : 2 MT Max
- Coil width : 600 MM
- Coil bore : 450 MM min, 510 MM max dia.
- Mandrel movement : Manually adjusted
- Back Tension : Manually adjusted
Entry gate will be provided for movement of sheet to roll former.
Main Base
The main base is MS fabricated structure and adequately ribbed to minimize the distortion. It is accurately machined on top and bottom surfaces the threaded holes are made on the bed for positioning the stands.
Mill stands (Station)
The stands are mounted on the bed of the machine the line alignment can be easily done due to guide ways arranged on the bed of the machine. Each forming head consists of a fixed housing and sliding type out board housing. The mill stands will be arranged to locate shafts mounted on taper bearings. For the top shafts the bearings are housed in the cartridge type bearing blocks. The bottom shaft bearings are located in the bored machined in the housings. The bottom arbors are fixed in position whereas the top arbors along with cartridge blocks could be raised or lowered in vertical guides machined in housings.
No comments:
Post a Comment