Stud Forming Machine

One of the most common uses for a Stud Track Roll Forming Machine is for the Producing of steel stud and Channel. With inflexible web and flange heights these industrial stud makers can produce virtually all of the standard stud and track sizes used in Worldwide Market.

• De coiler 2 ton cap.
• Entry Gate with
• Roll Forming with 9 station , 1 Gear Boxes & 5 H.P. electrical.
• Control Panel semi auto
• Cutting Unit

Technical Specifications : (Plate body)

• Maximum sheet width that can be formed : 600 mm
• Maximum sheet thickness in G I Strips that can be formed : 1 mm
• Vertical distance between shafts : 100 mm
• Horizontal distance between shafts : 190 mm
• Number of forming stations : 9 nos.
• Vertical station : 7 nos.
• Total HP for Line : 5 (ABB)
• Speed of the machine : 4mt/minute
• Size of machine : 1600 x 800 x 1100 mm

Mandrel Uncoiler

• Coil weight : 2 MT Max
• Coil width : 600 MM
• Coil bore : 450 MM min, 510 MM max dia.
• Mandrel movement : Manually adjusted
• Back Tension : Manually adjusted

Entry Gate
Entry gate will be provided for movement of sheet to roll former.
Main Base
The main base is MS fabricated structure and adequately ribbed to minimize the distortion. It is accurately machined on top and bottom surfaces the threaded holes are made on the bed for positioning the stands.

Stud Roll Forming Machine

We offering finest quality Steel Frame Roll Forming Machine to clients. This is the fastest machine on the market. The newly servo drive punch simultaneously advances and punches with accuracy as the material continually moves through the machine. Not only does this considerably increase the speed of the roll forming machine, but also increases the life of the equipment tools.

• De coiler 2 ton cap.
• Entry Gate with
• Roll Forming Machine with 9 station, 1 Gear Boxes & 3H.P. electrical.
• Control Panel semi auto
• Cutting Unit

Technical Specifications : (Plate body)

• Maximum sheet width that can be formed : 175mm
• Maximum sheet thickness in CRCA Strips that can be formed : 1 mm
• Vertical distance between shafts : 80 mm
• Horizontal distance between shafts : 175mm
• Number of forming stations : 9 nos.
• Vertical station : 7 nos.
• Total HP for Line : 3(ABB)
• Speed of the machine : 4mt/minute
• Size of machine : 1600 x 800 x 1100 mm

Mandrel Uncoiler

• Coil weight : 2 MT Max
• Coil width : 90 MM
• Coil bore : 450 MM min, 510 MM max dia.
• Mandrel movement : Manually adjusted
• Back Tension : Manually adjusted

Entry Gate
Entry gate will be provided for movement of sheet to roll former.

Main Base
The main base is MS fabricated structure and adequately ribbed to minimize the distortion. It is accurately machined on top and bottom surfaces the threaded holes are made on the bed for positioning the stands.

Mill stands (Station)
The stands are mounted on the bed of the machine the line alignment can be easily done due to guide ways arranged on the bed of the machine. Each forming head consists of a fixed housing and sliding type out board housing. The mill stands will be arranged to locate shafts mounted on taper bearings. For the top shafts the bearings are housed in the cartridge type bearing blocks. The bottom shaft bearings are located in the bored machined in the housings. The bottom arbors are fixed in position whereas the top arbors along with cartridge blocks could be raised or lowered in vertical guides machined in housings.

Pop Roll Forming Machine

Gurukrupa Industries manufacturing best quality POP Channel Roll Forming Machine in India also exporting worldwide. Most advanced yet simplest design and robust structure ensures precise performance, easy operation and higher efficiency. These machines are available with 'manually' as well as 'automatically control' panel.

• D coiler 5 ton cap.
• Entry Gate with
• Roll Forming Machine with 18 stations, 10 H.P. electrical.
• Control Panel semi auto
• Cutting Unit (Hydro.)

Technical Specifications

• Maximum sheet width that can be formed : 1250 mm
• Maximum sheet thickness in CRCA Strips that can be formed : 1.2 mm
• Horizontal distance between shafts : 500mm
• Number of forming stations : 16 nos.
• Total HP for Line : 8
• Speed of the machine : 10 -14 mt / mint
• Size of machine : 9500 x 1700 x 1100 mm

Mandrel Uncoiler

• Coil weight : 5 MT Max
• Coil width : 1250 MM
• Coil bore : 450 MM min, 510 MM max dia.
• Mandrel movement : Manually adjusted
• Back Tension : Manually adjusted

Entry Gate
Entry gate will be provided for movement of sheet to roll former.
Main Base
the main base is MS fabricated structure and adequately ribbed to minimize the distortion. It is accurately machined on top and bottom surfaces the threaded holes are made on the bed for positioning the stands.
Mill stands (Station)
The stands are mounted on the bed of the machine the line alignment can be easily done due to guide ways arranged on the bed of the machine. Each forming head consists of a fixed housing and sliding type out board housing. The mill stands will be arranged to locate shafts mounted on taper bearings. For the top shafts the bearings are housed in the cartridge type bearing blocks. The bottom shaft bearings are located in the bored machined in the housings. The bottom arbors are fixed in position whereas the top arbors along with cartridge blocks could be raised or lowered in vertical guides machined in housings.

Drywall Stud Roll Forming Machine

Drywall roll Forming Machine is a vertical member in the light frame construction techniques called balloon framing and platform framing of a building's wall. Drywall stud roll forming machine is the essential for its production.

• De coiler 2 ton cap.
• Entry Gate with
• Roll Forming with 9 station , 1 Gear Boxes & 5 H.P. electrical.
• Control Panel semi auto
• Cutting Unit

Technical Specifications : (Plate body)

• Maximum sheet width that can be formed : 600 mm
• Maximum sheet thickness in G I Strips that can be formed : 1 mm
• Vertical distance between shafts : 100 mm
• Horizontal distance between shafts : 190 mm
• Number of forming stations : 9 nos.
• Vertical station : 7 nos.
• Total HP for Line : 5 (ABB)
• Speed of the machine : 4mt/minute
• Size of machine : 1600 x 800 x 1100 mm

Mandrel Uncoiler

• Coil weight : 2 MT Max
• Coil width : 600 MM
• Coil bore : 450 MM min, 510 MM max dia.
• Mandrel movement : Manually adjusted
• Back Tension : Manually adjusted

Entry Gate
Entry gate will be provided for movement of sheet to roll former.

Main Base
The main base is MS fabricated structure and adequately ribbed to minimize the distortion. It is accurately machined on top and bottom surfaces the threaded holes are made on the bed for positioning the stands.

Mill stands (Station)
The stands are mounted on the bed of the machine the line alignment can be easily done due to guide ways arranged on the bed of the machine. Each forming head consists of a fixed housing and sliding type out board housing. The mill stands will be arranged to locate shafts mounted on taper bearings. For the top shafts the bearings are housed in the cartridge type bearing blocks. The bottom shaft bearings are located in the bored machined in the housings. The bottom arbors are fixed in position whereas the top arbors along with cartridge blocks could be raised or lowered in vertical guides machined in housings.

Door Frame Roll Forming Machine

We offering you to an outstanding quality range of Door Frame Roll Forming Machine. These Door Frame Roll Forming Machines can be customized as per customer requirement based. These Door Frame Roll Forming Machines are Mostly known for its stability and superiority. Our Door Frame Roll Forming Machines can be availed at best competitive rates.

• De coiler 2 ton cap.
• Entry Gate with
• Roll Forming Machine with 9 station , 1 Gear Boxes & 5 H.P. electrical.
• Control Panel semi auto
• Cutting Unit

Technical Specifications : ( Plate body)

• Maximum sheet width that can be formed : 600 mm
• Maximum sheet thickness in G I Strips that can be formed : 1 mm
• Vertical distance between shafts : 100 mm
• Horizontal distance between shafts : 190 mm
• Number of forming stations : 9 nos.
• Vertical station : 7 nos.
• Total HP for Line : 5 (ABB)
• Speed of the machine : 4mt/minute
• Size of machine : 1600 x 800 x 1100 mm

Mandrel Uncoiler

• Coil weight : 2 MT Max
• Coil width : 600 MM
• Coil bore : 450 MM min, 510 MM max dia.
• Mandrel movement : Manually adjusted
• Back Tension : Manually adjusted

Entry Gate
Entry gate will be provided for movement of sheet to roll former.

Main Base
The main base is MS fabricated structure and adequately ribbed to minimize the distortion. It is accurately machined on top and bottom surfaces the threaded holes are made on the bed for positioning the stands.

Mill stands (Station)
The stands are mounted on the bed of the machine the line alignment can be easily done due to guide ways arranged on the bed of the machine. Each forming head consists of a fixed housing and sliding type out board housing. The mill stands will be arranged to locate shafts mounted on taper bearings. For the top shafts the bearings are housed in the cartridge type bearing blocks. The bottom shaft bearings are located in the bored machined in the housings. The bottom arbors are fixed in position whereas the top arbors along with cartridge blocks could be raised or lowered in vertical guides machined in housings.

Cable Tray Machine

The Cable Tray Roll Forming Machine Produced by us, is used for producing cable trays that are used in different kind of factories and buildings. We offering you to Cable Tray Machine that comprise of efficient Punching Press, Hydraulic Press, Electric Control panel and many other Equipment, which make it an ideal option for many. The Cable Tray Roll Forming Machine can Manufacring a both superiority and quantity cable trays in less time.

• De coiler 2 ton cap.
• Entry Gate with
• Roll Forming Machine with 9 station, 1 Gear Boxes & 3H.P. electrical.
• Control Panel semi auto
• Cutting Unit

Technical Specifications : (Plate body)

• Maximum sheet width that can be formed : 600 mm
• Maximum sheet thickness in G I Strips that can be formed : 1 mm
• Vertical distance between shafts : 100 mm
• Horizontal distance between shafts : 190 mm
• Number of forming stations : 9 nos.
• Vertical station : 7 nos.
• Total HP for Line : 3(ABB)
• Speed of the machine : 4mt/minute
• Size of machine : 1600 x 800 x 1100 mm

Mandrel Uncoiler

• Coil weight : 2 MT Max
• Coil width : 600 MM
• Coil bore : 450 MM min, 510 MM max dia.
• Mandrel movement : Manually adjusted
• Back Tension : Manually adjusted

Entry Gate
Entry gate will be provided for movement of sheet to roll former.

Main Base
The main base is MS fabricated structure and adequately ribbed to minimize the distortion. It is accurately machined on top and bottom surfaces the threaded holes are made on the bed for positioning the stands.

Ceiling Section Roll Forming Machine

We are involved in manufacturing and Exporter accurately Ceiling Channel Roll Forming Machine. These products are mainly used for structure purposes in diverse industries. The entire range is fabricated using high quality raw materials at our modern and well-equipped manufacturing facility. We have a ability to produce bulk needs of ceiling section of customer within the specific time frame.

• D coiler 5 ton cap.
• Entry Gate with
• Roll Forming with 18 stations, 10 H.P. electrical.
• Control Panel semi auto
• Cutting Unit (Hydro.)

Technical Specifications

• Maximum sheet width that can be formed : 1250 mm
• Maximum sheet thickness in CRCA Strips that can be formed : 1.2 mm
• Horizontal distance between shafts : 500mm
• Number of forming stations : 16 nos.
• Total HP for Line : 8
• Speed of the machine : 10 -14 mt / mint
• Size of machine : 9500 x 1700 x 1100 mm

Mandrel Uncoiler

• Coil weight : 5 MT Max
• Coil width : 1250 MM
• Coil bore : 450 MM min, 510 MM max dia.
• Mandrel movement : Manually adjusted
• Back Tension : Manually adjusted

Entry Gate
Entry gate will be provided for movement of sheet to roll former.

Main Base
the main base is MS fabricated structure and adequately ribbed to minimize the distortion. It is accurately machined on top and bottom surfaces the threaded holes are made on the bed for positioning the stands.