We take immense pride to introduce our company as one of the truthful manufacturers and exporters of Roof Tile Roll Forming Machine.
A wide gamut of these machines is Producing by us by implementing world
class quality. we are offering you to this Roof tile roll forming
machine in as per your requirement. Our Roll Forming Machine is widely
appreciated by the customer all around the world due to smooth and
constantaly performance. Further, this Roof Tile Roll Forming Machine is Mostly used for manufacturing steel sheets that are used for the roofsof buildings.
Entry gate will be provided for movement of sheet to roll former.
Main Base
The main base is MS fabricated structure and adequately ribbed to minimize the distortion. It is accurately machined on top and bottom surfaces the threaded holes are made on the bed for positioning the stands.
Mill stands (Station)
The stands are mounted on the bed of the machine the line alignment can be easily done due to guide ways arranged on the bed of the machine. Each forming head consists of a fixed housing and sliding type out board housing. The mill stands will be arranged to locate shafts mounted on taper bearings. For the top shafts the bearings are housed in the cartridge type bearing blocks. The bottom shaft bearings are located in the bored machined in the housings. The bottom arbors are fixed in position whereas the top arbors along with cartridge blocks could be raised or lowered in vertical guides machined in housings.
- D coiler 5 ton cap.
- Entry Gate with
- Roll Forming with 18 station , 10 H.P. electrical.
- Control Panel semi auto
- Cutting Unit (Hydro.)
- Maximum sheet width that can be formed : 1450 mm
- Maximum sheet thickness in CRCA Strips that can be formed : 0.5 mm
- Horizontal distance between shafts : 500mm
- Number of forming stations : 18 nos.
- Total HP for Line : 15
- Speed of the machine : 10 -14 mt / minute
- Size of machine : 9500 x 1700 x 1100 mm
- Coil weight : 5 MT Max
- Coil width : 1450 MM
- Coil bore : 450 MM min, 510 MM max dia.
- Mandrel movement : Manually adjusted
- Back Tension : Manually adjusted
Entry gate will be provided for movement of sheet to roll former.
Main Base
The main base is MS fabricated structure and adequately ribbed to minimize the distortion. It is accurately machined on top and bottom surfaces the threaded holes are made on the bed for positioning the stands.
Mill stands (Station)
The stands are mounted on the bed of the machine the line alignment can be easily done due to guide ways arranged on the bed of the machine. Each forming head consists of a fixed housing and sliding type out board housing. The mill stands will be arranged to locate shafts mounted on taper bearings. For the top shafts the bearings are housed in the cartridge type bearing blocks. The bottom shaft bearings are located in the bored machined in the housings. The bottom arbors are fixed in position whereas the top arbors along with cartridge blocks could be raised or lowered in vertical guides machined in housings.
No comments:
Post a Comment