One of the most common uses for a Stud Track Roll Forming Machine
is for the Producing of steel stud and Channel. With inflexible web and
flange heights these industrial stud makers can produce virtually all
of the standard stud and track sizes used in Worldwide Market.
Entry gate will be provided for movement of sheet to roll former.
Main Base
The main base is MS fabricated structure and adequately ribbed to minimize the distortion. It is accurately machined on top and bottom surfaces the threaded holes are made on the bed for positioning the stands.
- De coiler 2 ton cap.
- Entry Gate with
- Roll Forming with 9 station , 1 Gear Boxes & 5 H.P. electrical.
- Control Panel semi auto
- Cutting Unit
- Maximum sheet width that can be formed : 600 mm
- Maximum sheet thickness in G I Strips that can be formed : 1 mm
- Vertical distance between shafts : 100 mm
- Horizontal distance between shafts : 190 mm
- Number of forming stations : 9 nos.
- Vertical station : 7 nos.
- Total HP for Line : 5 (ABB)
- Speed of the machine : 4mt/minute
- Size of machine : 1600 x 800 x 1100 mm
- Coil weight : 2 MT Max
- Coil width : 600 MM
- Coil bore : 450 MM min, 510 MM max dia.
- Mandrel movement : Manually adjusted
- Back Tension : Manually adjusted
Entry gate will be provided for movement of sheet to roll former.
Main Base
The main base is MS fabricated structure and adequately ribbed to minimize the distortion. It is accurately machined on top and bottom surfaces the threaded holes are made on the bed for positioning the stands.
No comments:
Post a Comment